Critter Clay™ – Self-hardening Clay. Low shrinkage rate (0-1%)

Directions

1. Remove the amount of clay you want to work with. Reseal left over clay in an air tight bag.
2. Working time is 30-60 minutes (extended by covering project with dampened cloth or plastic to prevent continued air exposure.) *Excessive water use will cause cracking.
3. Shape as desired by hand or with sculpting tools; sticks best to clean & textured surfaces. Poke holes for piece to piece adhesion. Smooth with a few drops of water.
4. Dries to the touch overnight. Full cure 1-6 days depending on size & thickness of project. Allow product to dry slowly & evenly at room temperature away from heat until hardened.
5. Clean-up with soap & water.
6. Accepts paints, markers & sealers when dry. Carve or sand if desired.

*If clay in bag becomes somewhat dry: restore with a couple squirts of water, seal overnight.
*For best quality after opening store unused clay in a sealed bag & use within 14 days.
*Freeze or refrigerate product for extended shelf life.

DANGER – contains crystalline silica known to be a human carcinogen via respiratory route. Applies only to the cured clay product when sanded or abraded in some manner to create airborne dust.
Hazard Statements – H350 May cause cancer (inhalation of dust). H372 Causes damage to the lungs through prolonged and repeated exposure to dust. Product contains an ingredient that is on the CA Proposition 65 list. Critter Clay™ Conforms to Safety Standard ASTM International D4236.